Using the Logic Analyzer
To access the System menus
To access the System menus
The System menus allow you to perform operations that affect the entire
logic analyzer, such as load configurations, change colors, and perform
system diagnostics.
Select the mode field.
1
Use the arrow keys to highlight the mode field, then press the Select key. Or,
if you are using the mouse, click on the field. This operation is referred to as
"select".
A pop-up menu appears with the choices System, Analyzer, and Scope. (If
you have installed any optional software, there may be other choices as well.)
Select System.
2
Select the menu field.
3
The pop-up lists five menus: Hard Disk, Flexible Disk, External I/O, Utilities,
and Test.
3–4