HP 1660CS-Series User Manual page 305

Specifications
Supplemental characteristics (logic analyzer)
Data entry/display
Labels Channels may be grouped together and given a 6-character
name. Up to 126 labels in each analyzer may be assigned with up to 32
channels per label.
Display modes State Listing, State Waveforms, Chart, Compare Listing,
Compare Difference Listing, Timing Waveforms, and Timing Listings.
State Listing and Timing Waveforms can be time-correlated on the same
displays.
Timing waveform Pattern readout of timing waveforms at X or O
marker.
Bases Binary, octal, decimal, hexadecimal, ASCII (display only), two's
complement, and user-defined symbols.
Symbols 1,000 maximum. Symbols can be downloaded over RS-232 or
HP-IB, or the optional LAN.
Marker functions
Time interval The X and O markers measure the time interval between
a point on a timing waveform and the trigger, two points on the same
timing waveform, two points on different waveforms, or two states (time
tagging on).
Delta states (state analyzer only) The X and O markers measure
the number of tagged states between one state and trigger or between
two states.
Patterns The X and O markers can be used to locate the nth
occurrence of a specified pattern from trigger, or from the beginning of
data. The O marker can also find the nth occurrence of a pattern from
the X marker.
Statistics X and O marker statistics are calculated for repetitive
acquisitions. Patterns must be specified for both markers, and statistics
are kept only when both patterns can be found in an acquisition.
Statistics are minimum X to O time, maximum X to O time, average X to
O time, and ratio of valid runs to total runs.
Auxiliary power
Power through cables Power through cables 1/3 amp at 5 V maximum per cable
11–8