HP 1660CS-Series User Manual page 46

If additional Symbols are needed, repeat step 4 until you have added
5
all symbols.
In this example three symbols are added: MEM RD, MEM WR, and DATA RD.
Toggle the Type field to "range" or "pattern".
6
When Type is range, a third field appears under the Stop column. To fully
specify a range, you need to enter a value for it, too.
Select the Pattern/Start field and use the keypad to enter an
7
appropriate value in the selected base. Use X for "don't care."
When the pattern is specified, press Done. If you created additional
8
Symbols, repeat steps 6 and 7 until all symbols are specified.
To close the symbol table menu, select Done.
9
Symbol table menu showing three symbols
You can also download symbol tables created by your programming
environment using HP E2450A Symbol Utility. The Symbol Utility is shipped
with the HP 1660CS-series logic analyzers.
See Also HP E2450A Symbol Utility User's Guide for more information on the
Symbol Utility.
Using the Logic Analyzer
To create a symbol
3–13