Channel Label Field - HP 1660CS-Series User Manual

The Scope Marker Menu

Channel Label field

V Marker value display
Any time the markers (either voltage and/or time) are turned on, the current
marker settings may be displayed on the channel, trigger, display and
auto-measure menus by using the Display Options field located to the right of
the timebase Delay field. The Display Options field provides a pop-up menu
that allows you to either select channel labels or to view the Sample Period
display or the Marker Value display.
The Marker Value display consists of two blocks. One contains settings for
the voltage markers, the second contains settings for the time markers. If
only one set of markers is turned on, only one of the two blocks will appear
on the screen.
On the marker menu, if time markers are turned off, the Sample Period
display will appear on the marker menu. If time markers are selected as
either On or Auto, the Sample Period display is not visible on the Marker
menu.
The Display Options field never appears on the Marker menu.
Channel Label field
The channel label field is the field to the left of the waveform display. When
you turn time markers on with voltage markers off, the voltage values where
the Tx and To markers intersect each waveform are displayed under each
channel label.
7-96