Configuration Capabilities - HP 1660CS-Series User Manual

Configuration Capabilities

The four analyzer models in the HP 1660CS-series offer a wide variety of
channel widths and memory depth combinations. The number of data
channels range from 34 channels with the HP 1663CS, up to 136 channels
with the HP 1660CS. In addition, a half-channel acquisition mode is available
which doubles memory depth from 4 K to 8 K per channel while reducing
channel width by half. All models have two scope channels and an
oscilloscope memory depth of 8 K.
The configuration guide below illustrates the memory depth/channel width
combinations in all acquisition modes with all analyzer models.
Table 7-1 State Analyzer Configurations
Mode
half-channel
100 MHz
full-channel
100 MHz
State Analyzer Configuration Considerations
•
Unused clock channels can be used as data channels.
•
With Time or State tags turned on, memory depth is reduced by half.
However, full depth is retained if you leave one pod pair unassigned.
HP 1660CS HP 1661CS
8K-deep / 68 8K-deep / 51
chan. 65 data chan. 48 data
+ 3 data or + 3 data or
clock clock
4K-deep / 136 4K-deep / 102
chan. 130 data chan. 96 data
+ 6 data or + 6 data or
clock clock
HP 1662CS HP 1663CS
8K-deep / 34 8K-deep / 17
chan. 32 data chan. 16 data
+ 2 data or + 1 data or
clock clock
4K-deep / 68 4K-deep / 34
chan. 64 data chan. 32 data
+4 data or + 2 data or
clock clock
7-3