Measurement Initialization Error; Warning: Run Halted Due To Variable Change - HP 1660CS-Series User Manual

Error Messages

"Measurement Initialization Error"

"Measurement Initialization Error"
The logic analyzer failed its internal hardware calibration.
Run the Performance Verification tests.
See Also
Chapter 12, "Operator's Service," or the HP 1660C/CS-Series Logic
Analyzers Service Guide for information on running the Performance
Verification test.

"Warning: Run HALTED due to variable change"

This message appears when certain analyzer settings are changed during a
repetitive run. When this occurs, the analyzer stops.
10–14