Display Options Field - HP 1660CS-Series User Manual

The Scope Display Menu

Display Options field

Display Options field
The Display Options field allows you to display either sample period
information or marker value information on the oscilloscope menus, and also
provides access to the scope channel labeling menu.
The Display Options field appears on the Channel, Trigger, Display and
Auto-Measure menus. Selecting the Display Options field provides a pop-up
menu, which provides the Set Channel Labels menu. If either voltage or time
markers are enabled, selecting the Display Options field reveals all three of
the following selections:
Set Channel Labels
Selecting Set Channel Labels from the Display Options pop-up will take you
to the Scope Channel Labels menu. This menu allows you to assign labels to
each of the oscilloscope channels. These labels will subsequently appear in
the channel label area to the left of the waveform display area. The scope
channel labels appear on single trace waveforms only. The default
oscilloscope labels are used for overlay and waveform math displays.
Display Sample Period
Selecting the Display Sample Period option displays the sample period
information on the scope menus. Sample period information is the default
display option and is always displayed when markers are turned off.
Display Marker Values
This option displays the marker value information on the oscilloscope menus.
7-78