Special Displays - HP 1660CS-Series User Manual

Special displays

Interleaved trace lists
Interleaved trace lists allow you to view data captured by two
analyzers in a single display. When you interleave the traces, you see
each state that was captured by each analyzer. These states are
shown on consecutive lines.
You can interleave state listings from state analyzers when two are
used together in a run. Interleaved state listings are useful when you
are using multiple analyzers to look at interaction between two or
more processors. They are also useful when you need more analysis
width than is available in one analyzer.
Mixed Display mode
The Mixed Display mode allows you to show state listings and timing
waveforms together on screen. State listings are shown at the top of
the screen and waveform displays are shown at the bottom. You can
interleave state listings from two analyzers at the top of the screen, if
desired. You can display waveforms from the timing analyzer at the
bottom of the screen.
5-30