To Save A Configuration - HP 1660CS-Series User Manual

To save a configuration

You can save configurations on a 3.5-inch disk or on the internal hard disk for
later use. This is especially useful for automating repetitive measurements for
production testing.
Go to the System Hard Disk or System Flexible Disk menu.
1
Set the field under System to Store.
2
Select the type of configuration you want to save in the field to the
3
right of Store.
You can save the analyzer configuration, the scope configuration, the system
configuration, or all three at the same time.
See Also
Scope, Analyzer, and System subheads of "Load and Store" in Chapter 7 for
details of what is stored in a configuration file.
Specify a file name into which to save the configuration using the to
4
file field.
Enter a description for the file using the file description field.
5
Select Execute.
6
If you want to save your file in a directory other than the root, you can select
Change Directory from the disk operations field, then type the name of the
desired directory in the directory name field or select it from the list of visible
directories using the knob.
6-4
File Management
To save a configuration