Using the Trigger Menu
To arm the oscilloscope with the analyzer
In this example STATE MACH triggers from Group Run, then arms TIME
Example
MACH and Scope.
To duplicate this, set STATE MACH to run from Group Run, TIME MACH to
run from STATE MACH, and Scope Arm In to Analyzer.
Arming with two analyzers and an oscillscope
When the run starts, the state analyzer automatically begins evaluating its
trigger sequence instruction. When the trigger sequence is satisfied, the
state analyzer sends an "Arm" signal to the timing analyzer, the oscilloscope,
and the external trigger.
4–14