Calibrating The Oscilloscope; Set Up The Equipment - HP 1660CS-Series User Manual

Calibrating the oscilloscope

Equipment Required
Equipment Critical Specification
Cable (2) BNC, 9-inch (equal length)
Cable 50 Ω BNC (m-to-m) 48-inch
Adapter BNC tee (m)(f)(f)
Adapter BNC (f)(f) (ug-914/u)

Set up the equipment

Turn on the logic analyzer. Let it warm up for 30 minutes if you have not
already done so.
Recommended Qty
Model/Part
HP 10502A 1
HP 10503A 1
HP 1250-0781 1
HP 1250-0080 1
12-7