Eoi Features - Toshiba ACE-tronics G9 ASD Installation And Operation Manual

Figure 21. The ACE-tronics G9 ASD Electronic Operator Interface Features.
Selected
item: (01)
Number
of items: (14)

EOI Features

LED Screen
— Displays the running frequency, active Fault, or active Alarm information.
Rotary Encoder
parameter, and performs the Enter key function. Turn the Rotary Encoder either clockwise or
counterclockwise to perform the Up or Down functions of the displayed menu selection. Press the Rotary
Encoder to perform the Enter (select) function.
LCD Screen
— Displays configuration information, performance data (e.g., output frequency, bus
voltage, torque, etc.), diagnostic information, and LED screen information in expanded text.
Local/Remote Key
Remote key is disabled while the Fault screen is displayed. The LED is on when the system is in the
Local Command mode. The Local mode allows the Command and Frequency control functions to be
carried out via the EOI.
The Remote mode enables the Command and Frequency control functions to be carried out via the ACE
G9-120V-PCB, RS485, Communication Card, Pulse Input, or the settings of F003/F004. The selection
may be made via Program  Fundamental  Standard Mode Settings 
Mode 1, respectively.
The availability of Local mode control (Command and Frequency control) may be disabled via Program
 Utilities  Prohibition 
Override. The availability of the Local mode of operation may be reinstated by changing this setting or
performing a Reset (see F007).
ESC Key
— Returns the system to the previous level of the menu, toggles between the EOI Command
screen and the Frequency Command screen, or cancels changes made to a field if pressed while still in
the reverse video mode (dark background/light text). The three functions are menu-specific.
Run Key
— Issues the Run command while in the Local mode. The Run key LED illuminates green
while stopped or red while running to alert personnel.
Mode Key
— Provides a means to access the three root menus. Pressing the Mode key repeatedly loops
the system through the three root menus (see
the Program menu will display the root menu screen or the Program sub-menu item being accessed prior
to pressing the Mode key.
ACE-tronics G9 ASD Installation and Operation Manual
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
01:14
Program
Startup Wizard...
Crane/Hoist...
Fundamental...
Terminal...
Direct Access...
Utilities...
— Used to access the ASD menu selections, change the value of a displayed
— Toggles the system to and from the Local and Remote modes. The Local/
Local/Remote Key Command Override
Command Mode
or
Figure 29 on pg. 52). While looping through the root menus,
LED Screen
Rotary Encoder
LCD Screen
Local/Remote
Key (LED)
Escape Key
Run Key
(LED)
Mode
Key
Stop-Reset Key
or Frequency
Local/Remote Key Frequency
33