Eoi Features - Toshiba G9 Installation And Operation Manual

efesotomasyon.com -Toshiba inverter,drive,servo,plc
Figure 21. The G9 ASD Electronic Operator Interface Features.
Program
Selected
Fundamental...
item: (01)
Terminal...
Direct Access...
Number
Utilities...
of items: (14)
Protection...

EOI Features

LED Screen
— Displays the running frequency, active Fault, or active Alarm information.
Rotary Encoder
parameter, and performs the Enter key function. Turn the Rotary Encoder either clockwise or
counterclockwise to perform the Up or Down functions of the displayed menu selection. Press the Rotary
Encoder to perform the Enter (select) function.
LCD Screen
— Displays configuration information, performance data (e.g., output frequency, bus
voltage, torque, etc.), diagnostic information, and LED Screen information in expanded normal text.
Local/Remote Key
Remote Key is disabled while the Fault screen is displayed. The LED is on when the system is in the
Local Command mode. The Local mode allows the Command and Frequency control functions to be
carried out via the EOI.
The Remote mode enables the Command and Frequency control functions to be carried out via the
Terminal Board, RS485, Communication Card, Pulse Input, or the settings of F003/F004. The
selection may be made via Program  Fundamental  Standard Mode Settings 
Frequency Mode 1, respectively.
The availability of Local mode control (Command and Frequency control) may be disabled via Program
 Utilities  Prohibition 
Override. The availability of the Local mode of operation may be reinstated by changing this setting or
performing a Reset (see F007).
ESC Key
— Returns the system to the previous level of the menu tree, toggles between the EOI
Command screen and the Frequency Command screen, or cancels changes made to a field if pressed
while still in the reverse video mode (dark background/light text). The three functions are menu-specific.
Run Key
— Issues the Run command while in the Local mode. The Run key LED illuminates green
while stopped or red while running to alert personnel.
Mode Key
— Provides a means to access the three root menus. Pressing the Mode Key key repeatedly
loops the system through the three root menus (see
menus, the Program menu will display the root menu screen or the Program sub-menu item being
accessed prior to pressing the Mode key.
G9 ASD Installation and Operation Manual
01:14
— Used to access the G9 ASD menu selections, change the value of a displayed
— Toggles the system to and from the Local and Remote modes. The Local/
Local/Remote Key Command Override
Figure 27 on pg.
LED Screen
Rotary Encoder
LCD Screen
Local/Remote
Key (LED)
Escape Key
Run Key
(LED)
Mode
Key
Stop-Reset Key
Command Mode
and Local/Remote Key Frequency
41). While looping through the root
and
29