Toshiba ACE-tronics G9 ASD Installation And Operation Manual page 235

F969
Monitor Output Function 31
Program  My Function  My Function Monitor
This parameter plays a role in the setup of the My Function feature by
establishing the function that is to be recorded and output as the Peak,
Minimum, or Normal (Avg.) value as selected at parameter F970.
Select the Monitor Display Input Setting number from
output the corresponding function.
Use the Communication Number if operating using communications.
Monitor Output Function Command 31
Program  My Function  My Function Monitor
This parameter plays a role in the setup of the My Function feature by allowing
the user to select the Peak, Minimum, or Normal (Avg.) value of the
parameter F969 selection to be recorded and output as a monitored function.
Settings:
Normal
Peak
Minimum
Monitor Output Function 41
Program  My Function  My Function Monitor
This parameter plays a role in the setup of the My Function feature by
establishing the function that is to be recorded and output as the Peak,
Minimum, or Normal (Avg.) value as selected at parameter F972.
Select the Monitor Display Input Setting number from
output the corresponding function.
Use the Communication Number if operating using communications.
Monitor Output Function Command 41
Program  My Function  My Function Monitor
This parameter plays a role in the setup of the My Function feature by allowing
the user to select the Peak, Minimum, or Normal (Avg.) value of the
parameter F971 selection to be recorded and output as a monitored function.
Settings:
Normal
Peak
Minimum
ACE-tronics G9 ASD Installation and Operation Manual
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Direct Access Number — F969
Parameter Type — Selection List
Factory Default — 2000
Changeable During Run — Yes
Table 12 on pg. 245 to
Direct Access Number — F970
Parameter Type — Selection List
Factory Default — Normal
Changeable During Run — Yes
Direct Access Number — F971
Parameter Type — Selection List
Factory Default — 2000
Changeable During Run — Yes
Table 12 on pg. 245 to
Direct Access Number — F972
Parameter Type — Selection List
Factory Default — Normal
Changeable During Run — Yes
F972
225