Use
9.3.1 Changing the prosthesis setting using the cockpit app
Product
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info
9.3.2 Overview of adjustment parameters in basic mode
The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait cycle. These para
meters act as basic settings for automatically adjusting the damping behaviour to the current motion situation (e.g.
ramps, slow walking speed, etc.).
The stance function and/or the sitting function can also be activated/deactivated. Further information on the stance
function (see Page 63). Further information on the sitting function (see Page 64).
The following parameters can be modified:
Parameter
Resistance
Stance function
Sitting function
Volume
9.3.3 Overview of adjustment parameters in MyModes
The parameters in the MyModes describe the static behaviour of the prosthesis for a specific motion pattern such
as cross-country skiing. Damping behaviour is not automatically controlled and adjusted in MyModes.
The following parameters can be modified in MyModes:
Parameter
Gain
Volume
68 | Ottobock
1) Once the component is connected and in the desired mode, tap the
symbol in the main menu.
→ The navigation menu opens.
2) Tap the menu entry "Settings".
change
→ A list appears with the parameters for the currently selected mode.
3) Change the setting of the desired parameter by tapping the "<", ">"
2. Golf
symbols.
INFORMATION: The prosthetist's setting is marked and, after the
setting has been changed, can be restored by tapping the "Stand
ard" button.
Adjustment soft
ware range
120 to 180
0 to 4
Adjustment soft
ware range
0 to 100
0 — 4
App/remote
Meaning
control adjust
ment range
+/- 10
Resistance against flexion motion e.g. when
walking down stairs or when sitting down
0 - deactivated
Activation/deactivation of the stance function.
1 - activated
This function needs to be enabled in the
adjustment software.
0 - deactivated
Activation/deactivation of the sitting function.
1 - activated
This function needs to be enabled in the
adjustment software.
0 to 4
Volume of beep signal for confirmation tones.
App/remote
Meaning
control adjust
ment range
+/- 10
Value for speed at which flexion resistance
increases as the knee angle increases
0 — 4
Volume of beep signal for confirmation tones.
C-Leg 3C98-3/3C88-3