Symbols On The Battery Charger; Operating States/Error Signals; Signals For Operating States - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

Declaration of conformity according to the applicable European directives
Serial number
Dustproof, protection against temporary submersion
Caution, hot surface

14.1.2 Symbols on the battery charger

Declaration of conformity according to the applicable European directives
In some jurisdictions it is not permissible to dispose of these products with unsorted household
waste. Disposal that is not in accordance with the regulations of your country may have a detri­
mental impact on health and the environment. Please observe the instructions of your national
authority pertaining to return and collection.
Lot number

14.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration signals.

14.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1x short
1x short
Mode switching
Beep signal Vibration sig­
nal
1x short 1x short
1x short 1x short
1x short 1x short
2x short 2x short
3x short 3x short
C-Leg 3C98-3/3C88-3
Vibration signal
3x short
1x before beep signal
Additional action performed
Mode switching using remote
control
Bouncing on the forefoot
Prosthetic leg moved next to con­
tralateral leg, set down and kept
still for 1 second
Prosthetic leg moved next to con­
tralateral leg, set down and kept
still for 1 second
Prosthetic leg moved next to con­
tralateral leg, set down and kept
still for 1 second
Event
Battery charger is connected or
battery charger already disconnected prior to start of char­
ging mode
Charging mode started (3 sec. after connection of battery
charger)
Battery charger disconnected after start of charging mode
Event
Mode switching process using remote
control.
Bouncing pattern recognised.
Switching to basic mode (mode 1) car­
ried out.
Switching to MyMode 1 (mode 2) car­
ried out.
Switching to MyMode 2 (mode 3) car­
ried out.
Appendices
Ottobock | 73