Switching Off The Product; Turning Bluetooth On The Prosthesis On/Off; Switching Bluetooth Off/On Using The Cockpit App; Querying The Prosthesis Status - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

9.4 Switching off the product

CAUTION
Using the product while switched off
Falling due to unexpected behaviour of the product because of changed damping behaviour.
► Before using the product, switch it on by connecting the power supply and battery charger.
In certain cases, e.g. for storage or transportation, the prosthesis can be purposely switched off. It can only be
switched on by connecting to a live outlet, a power supply and a battery charger.
Switching off
► Connect/disconnect the battery charger to/from the product 3x. A wait time of approx. 2 seconds is required
before disconnecting the battery charger again.
→ After disconnecting 3 times, a descending sequence of 5 beeps is emitted and the product is then switched
off.
Switching on
1) Connect the power supply with battery charger to the socket.
2) Connect the battery charger to the product.
→ The correct connection of the battery charger to the product is indicated by feedback (see Page 75).

9.5 Turning Bluetooth on the prosthesis on/off

INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down or by connecting/discon­
necting the battery charger. Bluetooth is then turned on for approx. 2 minutes. During this time, the app must be
started and used to establish a connection. If required, Bluetooth on the prosthesis can be switched on perman­
ently afterwards (see Page 69).

9.5.1 Switching Bluetooth off/on using the cockpit app

Switching off Bluetooth
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Deactivate Bluetooth".
4) Follow the on-screen instructions.
Switching on Bluetooth
1) Rotate the component or connect/disconnect the battery charger.
→ Bluetooth is switched on for approx. 2 minutes. During this time, the app must be started in order to estab­
lish a connection to the component.
2) Follow the on-screen instructions.
→ If Bluetooth is switched on, the

9.6 Querying the prosthesis status

9.6.1 Query status through cockpit app

1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".

9.6.2 Status display in the cockpit app

Menu option
Trip: 1747
Step: 1747
Batt.: 68
C-Leg 3C98-3/3C88-3
symbol appears on the screen.
Description
Daily step counter
Total step counter
Current prosthesis charge level, as a
percentage
Possible actions
Reset the counter by tapping the
"Reset" button.
For informational purposes only
For informational purposes only
Use
Ottobock | 69