Polycom RSS 4000 User Manual page 99

DTMF
Type "dtmf {on | off}" after the prompt "#" to enable or disable the system to
respond to DTMF requests from the remote control. For example, enter
"dtmf on" to enable the DTMF response.
File System
Type "fscheck {on | off}" after the prompt "#" to enable or disable the file
system checking during the system startup. For example, enter " fscheck on"
to enable the file system checking.
Ping
Enter ping <ip> {-n<count>} {-w<time>} {-l<size>} after the prompt "#" to
check the network connection status.
Table 6-48
[Example] Send the host whose IP address is 172.21.100.111 a Ping packet
with the size of 1500 bytes for five times cyclically. The wait time is 1000 ms:
Polycom, Inc.
Parameters Description
Parameter
ip
-n<count>
-w<time>
-l<size>
Chapter 6 - Appendix A – Telnet/Terminal Commands
Description
IP address of the destination host
Packet sending times, defaulted to 10
Waiting time, defaulted to 1000 ms
Size of the sent packet, defaulted to 32 bytes
6-5