Security Policy - Polycom RSS 4000 User Manual

Security Policy

Polycom® RSS™ 4000 system provides detailed security policy settings. You
can define login times, password validity period, complexity of password
setting, maximum visiting duration, and so on to ensure the secure access to
the system.
To set security policy:
1
2
Table 4-36
Parameter
Account
Management
Session
Management
Polycom, Inc.
Click System Config>Security Setting>Security Policy in the menu bar
at the top of the page.
Configure the following parameters on the Security Policy page:
Security Policy Description
Description
Inactive Time for
Locking Account
Failed Login
Lockout Threshold
Failed Login
Lockout Window
Failed Login
Locked Duration
Session Idle
Timeout
Session Maximum
Number Per User
Session Maximum
Number Per
Application
Charpter 4 - Administrator Configuration
Specifies a validity period for a user account
that is not used for a long time.
If the user keeps the account unlogged for
the time set, the account status changes to
Inactive. Inactive accounts cannot be used
to log in to the system until the administrator
changes the status to Active.
Specifies the number of failed login
attempts allowed in the period set in Failed
Login Lockout Window before the system
sets the account status to Locked. The
user cannot log in until the administrator
changes the status to Active.
Specifies the period during which the
number of failed login attempts is
calculated.
Specifies the amount of time the account
stays locked. If you specify Indefinite
Lockout, the account stays locked until the
administrator changes the status to Active.
Specifies the idle time of the system. If you
do not perform any operation for the time
set here, you automatically exit the system
and need to log in again.
Specifies the maximum number of sessions
allowed for each user account.
Specifies the maximum number of users
who can be logged in during a session.
4-35