Polycom RSS 4000 User Manual page 83

If you do not activate the system, you can still use the Web interface, but
cannot perform incoming calls, recording, live streaming and video
on-demand operations using the system.
To install Version 7.0 upgrade pack:
1
2
3
4
5
To activate the upgraded system:
1
2
3
4
5
6
7
Log in to the Web interface after the system is restarted and enter
Admin>Product Activation where the system software version is shown to
be 7.0. This means that the system has upgraded successfully and is ready
for use.
Polycom, Inc.
Download V7.0 software pack needed for upgrade from Polycom
website (http://www.polycom.com/support/network/index.html) to
the local computer.
Click Admin>System Upgrade on the Web page of your Polycom®
RSS™ 4000 system.
Click Viewing License Agreement on the System Upgrade page and
read the license agreement. Select I have read and agree to the terms of
the license agreement to continue the upgrade.
Click the Open button, select the upgrade pack, and click Upload.
Confirm the uploading when prompted.
Log in the Web configuration interface after the system is restarted. You
are brought to the Product Activation page and prompted to activate the
device.
Click Polycom Resource Center link to enter the Polycom Resource
Management Center.
Enter your E-mail address and password to log in or register for a new
account.
Go to Licensing & Product Registration > Activation/Upgrade.
Follow the page prompts step by step to generate the Key Code required
for system activation.
If you are required to enter the License Number and Serial Number of
the device, you can find them from the document provided with the
Polycom® RSS™ 4000 device.
Go back to the Product Activation page, enter the activation key you
obtained into Activation Key box, and click Save.
Confirm to restart the system in a popup System Reboot box.
If the V6.x system is upgraded from V5.0, and has not imported recorded files or
deleted V5.0 files, then these operations can be performed or the system can be
restored to V5.0 on the Admin>Data Backup/Restore page after upgrading to V7.0.
See Version 5.0 remaining operation.
Charpter 4 - Administrator Configuration
4-49