To configure an Active Directory server:
1
2
Table 4-28
Parameter
Integrate with Active
Directory Server
Active Directory Server
User ID
User Password
3
After configuring the Active Directory server successfully, the configured
Active Directory server domain name displays in the Domain drop-down
list of the system's Web Login page.
Then, you can select the appropriate domain in the drop-down list, and use
existing users in the domain to log in directly. When logging in to Polycom®
RSS™ 4000 Web Management pages using an existing domain user, the user
gets only ordinary user permissions.
Calendar Configuration
Polycom® RSS™ 4000 system can be integrated with Microsoft Exchange
Server 2007, and work with other Polycom video conferencing devices to
record or live stream conferences when scheduling conferences through
Outlook.
To configure mail server information in Polycom® RSS™ 4000:
1
2
Polycom, Inc.
Click System Config>Security Setting>Active Directory in the menu
bar at the top of the page.
Configure the following parameters on the Active Directory page:
Active Directory Parameters Description
Description
Defines whether to integrate the Polycom® RSS™ 4000
with an Active Directory server. Once this option is
enabled, you can configure specific parameters.
Sets the IP address or domain name of the Active
Directory server to be integrated.
Note: If you set a domain name, make sure you have
already set a DNS server address that can resolve this
domain name in System Config>IP Setting.
Sets the user name that will be used by the Polycom®
RSS™ 4000 to access resources on the Active Directory
server.
Sets the user password that will be used by the Polycom®
RSS™ 4000 to access resources on the Active Directory
server.
Once set up is complete, click Update.
Click System Config>Service Setting>Calendar Configuration in the
menu bar at the top of the page.
Configure the following parameters on the Calendar Configuration
page:
Charpter 4 - Administrator Configuration
4-27
Need help?
Do you have a question about the RSS 4000 and is the answer not in the manual?
Questions and answers