System Initial Configuration; Preparations Before Configuration - Polycom RSS 4000 User Manual

Chapter 1 - Polycom® RSS™ 4000 Introduction

System Initial Configuration

Preparations before Configuration

•
1-4
Table 1-1 Explanation of System Indicators
Panel
Indicator
Identifier
LAN1 Activity
Status LAN1 LED
Indicator
System Status
STATUS LED
Indicator
Hard Disk
Status
HDD LED
Indicator
Power Status
Power LED
Indicator
Obtaining Network Information
Before the initial configuration, get the following information from your
network administrator to configure Polycom® RSS™ 4000 to your local
network:
IP address, subnet mask, and default gateway IP address to be assigned
to Polycom® RSS™ 4000 LAN ports.
Status Explanation
Network port is functioning
Green light
normally, with no data being
on
transmitted
Network port is functioning
Green light
normally, with data being
blinking
transmitted
Off No Network connection
System is functioning normally,
Blue light
with no resources being used
on
(idle)
Blue light System is functioning normally,
blinking with resources being used
System alert, with no resources
Red light on
being used (idle)
Red light System alert, with resources
blinking being used
Blue light
Hard disk is functioning normally
on
Blue light
System is recording
blinking
Hard disk is functioning
Red light on
abnormally
Green light
Power is functioning normally
on
Red light
Power alert
blinking
Polycom, Inc.