System Recovery - Polycom RSS 4000 User Manual

Chapter 4 - Administrator Configuration
3
4
5
6

System Recovery

4-56
After the system restarts, log in to the Web Configuration page. A
default configuration setting dialog box will display on the page.
You can configure following parameters:
Table 4-45 Default restoration Parameters Settings
Parameter
Build-in Account
Password
Confirm Password
Keep current IP setting
Click Next; if you want to continue, enter YES in the box to confirm
restoration, and click OK. Click Back button to go back to the setting
box.
Remove the USB storage device before the system restarts to complete
restoration.
The system will enter rescue mode automatically when it fails to reboot. For
information about the rescue mode, refer to the Using the Rescue Mode of RSS
4000guide provided with the system.
Description
System built-in default administrator account. The user
name and password can be modified here.
Specifies the confirm password.
Specifies whether or not the default configuration
restoration reserves the current system IP address. If not
selected, the system will reset the IP address to the default
192.168.1.254, subnet mask to 255.255.255.0, and
gateway to 192.168.1.1.
Polycom, Inc.