Command Introduction - Polycom RSS 4000 User Manual

Chapter 6 – Appendix A – Telnet/Terminal Commands
The login interface shows all of the software information and you'll be
prompted to enter the login password. Now enter the login password and
press the Enter key.
If you entered a wrong password, you may be required to re-login to the
system.
If you entered the right password, you will be brought directly to the
command setting interface.

Command Introduction

Help
After logging into the system, you may enter ? or help after the prompt "#"
to show the command prompt information.
Exit
Enter "exit" after the prompt "#" to exit the command control interface.
View Device Information
Enter show after the prompt # to view the current device information,
including the system information, license information, interface information
and IP address.
6-2
The factory default login password is POLYCOM (case sensitive).

"<>" indicates an optional parameter

"{}" indicates a required parameter

"|" indicates a 1-out-of-N parameter
Polycom, Inc.