Enabling The Client Certificate Validation; Maximum Security Mode - Polycom RSS 4000 User Manual

the maximum security mode, refer to Maximum Security Mode.
To configure OCSP:
1
2
3

Enabling the Client Certificate Validation

If client certificate validation is enabled in the system, other systems can only
connect to the Polycom® RSS™ 4000 system only if they present a client
certificate issued by a CA that the system trusts.
Enable the client certificate validation only if your environment meets the
following conditions:
•
•
•
To enable the client certificate validation:
1
2
3

Maximum Security Mode

The Polycom® RSS™ 4000 system can be configured to work in maximum
security mode for meeting high-security environment requirements, for
example, government or military environment requirements.
In this mode, a SSL/TLS certificate is installed on the system, ensuring
secure communications across the network.
When running in maximum security mode, the system has the following
restrictions or behavior changes for secure protection:
Polycom, Inc.
Click System Config> Certificate Management in the menu bar at the
top of the page.
Select a certificate to verify OCSP response messages signed by the
specified certificate's private key.
The system chooses an appropriate certificate automatically if this field
is not specified.
Click Store OCSP configuration to save your changes in the system.
Your network have implemented a complete public key infrastructure
(PKI) system, including a CA server, client software (and optionally
hardware, tokens, or smartcards), and the appropriate operational
procedures.
The CA's public certificate is installed in the Polycom® RSS™ 4000
system so that it trusts the CA.
All authorized users' systems, including yours, have a client certificate
signed by the CA that authenticates them to the Polycom® RSS™ 4000
system.
Click System Config> Client Certificate in the menu bar at the top of
the page.
Select the Enable web client certificate validation option.
Click Update. The system restarts to apply your changes.
Charpter 4 - Administrator Configuration
4-41