Dialing-Into A Vrr To Start Recording; Managing Vrrs - Polycom RSS 4000 User Manual

Dialing-into a VRR to Start Recording

You can start recording using a user-defined VRR in one of the following
two ways: directly dialing in the VRR through an endpoint remote control or
dialing out from VRR using the Web Management page to connecting the
endpoint.
To dial in VRR through an endpoint's remote control:
•
•
•
To dial-out from VRR using Web Management page:
For detailed instructions, see To start recording from the Web UI in the section
Starting a Recording.

Managing VRRs

An administrator can edit or delete a created VRR.
To edit or delete a created VRR:
1
2
3
Polycom, Inc.

Once a VRR is created, the VRR owner is automatically added to the allowed list
and authorized to view and edit.

Administrators are not limited by the allowed list, and have always permissions to
view and edit VRR recorded files or live streaming.
If the Polycom® RSS™ 4000 and the endpoint are both registered to a
gatekeeper, the dial-in number is [RSS E.164 suffix][VRR number].
For example, if the Polycom® RSS™ 4000 E.164 is 1234 and your VRR
number is 1000, you may dial "12341000".
If the Polycom® RSS™ 4000 and the endpoint are both registered to a
SIP server, the dial-in number is [VRR number]@[RSS IP address].
For example, if your VRR number is 1000 and the Polycom ® RSS™ 4000
IP address is 172.21.110.2, you may dial "1000@172.21.110.2".
If the network is not configured with a gatekeeper or SIP server, the
dial-in number is [RSS IP address]##[VRR number].
For example, if the Polycom ® RSS™ 4000 IP address is 172.21.110.2 and
your VRR number is 1000, you may dial "172.21.110.2##1000".
If the Polycom® RSS™ 4000 system is configured in connection with a Polycom RMX
series system through the recording link, you can specify the VRR to be used by
adding the VRR number in the Recording Link field on the Polycom RMX system.
For more information, refer to the Polycom RMX system Administrator's Guide.
Click VRR>VRRs in the menu bar at the top of the page.
Click the VRR entry to be edited in the VRR List.
In the ACTIONS area on the left side of the page, click Edit or Delete to
modify or delete the VRR.
Charpter 4 - Administrator Configuration
4-7