Polycom RSS 4000 User Manual page 84

Chapter 4 - Administrator Configuration
1
2
1
2
3
4
5
6
7
8
1
4-50
To upgrade from Version 5.0 to Version 7.0
To upgrade the system from V5.0 to V7.0, you need to complete the
following two procedures:
Upgrade the system from V5.0 to 6.0.
Upgrade the system from V6.0 to 7.0.
To upgrade the system from V5.0 to 6.0:
Download V6.0 software packs needed for upgrade from Polycom
website (http://www.polycom.com/support/network/index.html) to
the local computer:
― RSS 4000 Version 6.0 Software Upgrade Package, Part1
― RSS 4000 Version 6.0 Software Upgrade Package, Part2
Click System Configuration>Upgrade/Reset System on the Web
interface of the Polycom® RSS™ 4000 system v5.0.
Click License Agreement on the Upgrade/Reboot System page and
read the license agreement. You need to select Agree to continue the
upgrade.
Click the Browse button, select the first upgrade pack (Part1), and click
Download File.
In the popup alert box and confirm box, always click Yes.
Click Restart button on the page to restart the system.
Re-log in to the Polycom® RSS™ 4000 system after the system is
restarted. Click the Upload RSS Package button in the page that
appears, to upload the second upgrade pack (Part2).
After uploading the file, and when the Server Status at the top of page is
IDLE, click the Reboot system button to restart the system.
The system runs with 6.0 software after it restarts. To continue to upgrade
the system to 7.0 version, refer to To upgrade from Version 6.x to Version 7.0.
Version 5.0 remaining operation
After upgrading the system to Version 7.0, it will only retain the previous IP
address from Version 5.0 and restore other configurations to the default
configuration. As Version 5.0 original system files and recorded archives
remain after upgrading, users can either import the Version 5.0 recorded
files into upgraded system or restore from the Version 7.0 to Version 5.0.
After upgrading the system to Version 7.0, half of hard disk space (500G)
will be used for storing files under v5.0. If you need more free space after
upgrading, please choose to clear v5.0 files. After deleting v5.0 files, the
system cannot be restored from v7.0 to v5.0 again.
Import recorded files from v5.0:
Click Admin>Data Backup/Restore in the menu bar at the top of the
page.
Polycom, Inc.