•
•
Obtaining the Product Activation Key
Before using Polycom® RSS™ 4000, you need to activate the device. Follow
the procedure below to obtain the product activation key. When you power
on and log in to the Polycom® RSS™ 4000 for the first time, the system
displays the product activation page, prompting you to enter a product
activation key.
1
2
3
4
5
Modifying the Initial IP Address
The system default IP address of LAN 1 port before delivery is:
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
There are two ways to change the initial LAN 1 IP address:
•
•
To change IP address via the Web interface:
1
2
3
Polycom, Inc.
(Optional) Your DNS server address. The Polycom® RSS™ 4000 is
shipped with the default DNS server addresses 208.67.222.222 and
208.67.220.220 pre-configured.
(Optional) Gatekeeper address, and the H.323 prefix and E.164 number
to be assigned to the Polycom® RSS™ 4000.
Enter the following website address in the address bar of the browser:
http://support.polycom.com, and go to the Polycom Support Center.
Enter your Email address and password to log in or register for a new
account.
Go to Licensing & Product Registration > Activation/Upgrade.
Follow the page prompts step by step to generate the Key Code required
for system activation.
If you are required to enter the License Number and Serial Number of
the device, you can find them from the document provided with the
Polycom® RSS™ 4000 device.
Record the activation key (Key Code) on the page.
Via Web login page (recommended)
Via Console or Telnet connection
Connect your computer to the LAN 1 port of the Polycom® RSS™ 4000
with a cross-over network cable, or connect your computer and
Polycom® RSS™ 4000 to the same switch in the LAN.
Set your computer IP address to be in the same network segment as the
Polycom® RSS™ 4000.
Run the Web browser on your computer, enter https://<system IP
address> in the address bar, and then press Enter.
Chapter 1 - Polycom® RSS™ 4000 Introduction
1-5
Need help?
Do you have a question about the RSS 4000 and is the answer not in the manual?
Questions and answers