Polycom RSS 4000 User Manual page 97

Idle Timeout Setting
Enter keepalive<timeout> after the prompt # to modify the keep-live
timeout setting.
Table 6-47
[Example] Set the timeout time to 60 seconds:
Reboot Device
Type "reboot" after the prompt "#" to restart the system. The system will
show the prompt message "Are you sure?". Type "Y" to restart the system, or
type "N" to cancel.
Reset Password
Type "reset password" after the prompt "#" to restore the administrator user
password for Web login to the default password (admin). The system will
show the prompt message "Are you sure?". Type "Y" to proceed, or type "N"
to cancel.
Restore System Configuration
Type "reset config" after the prompt "#" to restore the following system
configurations to the default value:
•
Polycom, Inc.
Parameters Description
Parameter Description
Defaults to 120 seconds and can be modified to any value in
timeout
the range of 5 – 600 seconds
System Config
― IP Setting
― System time
― Recording Setting
― Security setting (Ports and security policy)
Chapter 6 - Appendix A – Telnet/Terminal Commands
R
6-3