Antivirus Protection - Polycom RSS 4000 User Manual

7

Antivirus Protection

Antivirus protection is an optional function that is available only when you
run the system in maximum security mode and install the license with the
Antivirus option. Please contact your supplier to obtain this function.
Antivirus protection lets you perform the following tasks:
•
•
•
Scanning
You can enable two types of scan in the system:
•
•
To scan uploaded files:
1
2
3
To schedule a scan:
1
2
3
4
Polycom, Inc.
Remove the USB hard disk from the system and then enter YES in the
dialog box. Click OK.
The system restarts and enters the maximum security mode.
Scan all files uploaded to the system and block files in which infection is
detected.
Schedule virus scans through the system and generate reports on the risk
level found.
Automatically upgrade virus DAT files from a specified internal
directory or manually upload signature files.
Scan to uploaded files: Scan will automatically start when a file is being
uploaded to the system. If a virus is detected, an alert is displayed and
the file s blocked.
Scheduled scan: Scan will automatically start at the scheduled time
through the entire system and generate a scan report named
rss_antivirus_xxxx.log in the Log page. You can schedule a scan to run
daily or monthly.
Click System Config> Antivirus in the menu bar at the top of the page.
In the Scanning area, select Enable scan of uploaded files option.
Click Update to apply settings.
Click System Config> Antivirus in the menu bar at the top of the page.
In the Scanning area, select the Enable scheduled system scan.
Click Schedule and choose one of the following options in the dialog
box that appears:
― Daily: Scan will be performed on the specified day and time of the
week. You can select multiple days.
― Monthly: Scan will be performed on the specified day and time of the
month.
Click Update in the bottom of the page to apply settings.
Charpter 4 - Administrator Configuration
4-43