Technological Unit Of The Technology Controller; Setting The System Of Units And Technology Unit - Siemens Sinamics CU240D-2 DP Operating Instructions Manual

Advanced commissioning
6.10 Selecting physical units
An overview of the unit groups and the possible physical units can also be found in the List
Manual.
See also
Overview of the manuals (Page 343)
6.10.3

Technological unit of the technology controller

Options when selecting the technological unit
p0595 defines in which technological unit the input and output variables of the technology
controller are calculated, e.g. [bar], [m³/min] or [kg/h].
Reference variable
p0596 defines the reference variable of the technological unit for the technology controller.
Unit group
Parameters involved with p0595 belong to unit group 9_1.
Further information on this topic is provided in the List Manual.
Special features
You must optimize the technology controller after changing p0595 or p0596.
6.10.4

Setting the system of units and technology unit

Setting using Startdrive
Precondition
You are offline with Startdrive.
148
Overview of the manuals (Page 343)
Converter with the control units CU240D-2
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF