Changes In The Current Edition - Siemens Sinamics CU240D-2 DP Operating Instructions Manual

Changes in the current edition

Essential changes with respect to Edition 09/2017
New functions
Corrections
● The PROFINET connectors of the Control Unit are sockets (not socket and connector).
● Diagrams standardized for the reduction of the output current as a function of installation
altitude.
Revised descriptions
● Only commissioning using the Startdrive PC-based tool is described. Commissioning with
STARTER has been removed.
Exceptions: Write and know-how protection.
You can find information on commissioning with STARTER on the Internet:
(https://support.industry.siemens.com/cs/ww/en/view/109751328)
Converter with the control units CU240D-2
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
Firmware version 4.7 SP10 (Page 321)
Connections and cables (Page 51)
Current derating as a function of the installation altitude (Page 316)
Operating Instructions, 09/2017 Edition
3