Siemens Sinamics CU240D-2 DP Operating Instructions Manual page 166
Sinamics g120d distributed inverter control unit with encoder evaluation
Hide thumbs
Also See for Sinamics CU240D-2 DP:
- List manual (910 pages) ,
- Operating instructions manual (358 pages) ,
- Getting started manual (68 pages)
Table of Contents
Advertisement
Advanced commissioning
6.12 Setpoints
Figure 6-24
You have the following options when selecting the source of the main setpoint:
● Inverter analog input.
● Inverter fieldbus interface.
● Motorized potentiometer simulated in the inverter.
● Fixed setpoints saved in the inverter.
You have the same selection options when selecting the source of the supplementary
setpoint.
Under the following conditions, the inverter switches from the main setpoint to other
setpoints:
● When the technology controller is active and appropriately interconnected, its output
specifies the motor speed.
● When jogging is active.
● When controlling from an operator panel or the STARTER PC tool.
164
Setpoint sources for the inverter
Converter with the control units CU240D-2
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
Advertisement
Table of Contents
