Installation; Mechanical Installation - Siemens Sinamics CU240D-2 DP Operating Instructions Manual
Sinamics g120d distributed inverter control unit with encoder evaluation
Hide thumbs
Also See for Sinamics CU240D-2 DP:
- List manual (910 pages) ,
- Operating instructions manual (358 pages) ,
- Getting started manual (68 pages)
Table of Contents
Advertisement
Installation
4.1
Mechanical Installation
Fitting the Control Unit to the Power Module
The inverter is delivered as two separate components - the Power Module (PM) and the
Control Unit (CU). The CU must be fitted to the PM prior to any further commissioning taking
place.
NOTICE
Damage due to incorrectly fitted seal
If the seal is not fitted correctly, the drive will not reach IP65 rating. In this case the
converter is not protected against water or dust. This may damage the converter.
• Fit the seal correctly when assembling the Power Module and the Control Unit.
Figure 4-1
Converter with the control units CU240D-2
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
Fitting the Control Unit to the Power Module
4
33
Advertisement
Table of Contents
