Operator Controls & Indicators - ELECTRO FREEZE COMPACT Series Operator's Manual

ELECTRO FREEZE Shake Model CS705-M2
5 Operator Controls
Figure 5-1
The following paragraphs describe
the operator controls and indicators.
Refer to figure 5-1 for location of these
controls and indicators on the freezer.
NOTE: The head, actuator rod, and metal
cover must be in place before the beater
will operate.
5.1 Syrup Pump Switch (1)
This two-position switch controls the
operating mode of your freezer.
a. "ON" (right) — This position
operates the syrup motor. Always use
this mode when operating the syrup
system.
b. "OFF" (left) — In this position the
syrup motors do not run.
10
—continued
CAUTION
Test operation of the head switch
prior to placing the freezer in
service. See Section 12, Routine
Maintenance, Monthly.
184592-01