1. Manuals
  2. Brands
  3. ELECTRO FREEZE Manuals
  4. Freezer
  5. COMPACT Series
  6. Operator's manual

ELECTRO FREEZE Compact Series Operator's Manual

Shake freezer
Hide thumbs Also See for Compact Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
with Illustrated Parts List
COMPACT SERIES
SHAKE FREEZER
Model CS705
184592 - 9/12
H. C. Duke & Son, LLC
P/N 184592 September 2012
Printed in U.S.A.

Advertisement

Table of Contents
loading

Related Manuals for ELECTRO FREEZE Compact Series

Summary of Contents for ELECTRO FREEZE Compact Series

  • Page 1 OPERATOR'S MANUAL with Illustrated Parts List COMPACT SERIES SHAKE FREEZER Model CS705 184592 - 9/12 H. C. Duke & Son, LLC P/N 184592 September 2012 Printed in U.S.A.
  • Page 2 This page is intentionally blank...
  • Page 3 Operator’s Manual for the Electro Freeze Model CS705 Compact Series Flavor Injected Shake Freezer All contents © Copyright 2012 H.C. Duke & Son, LLC, 2116 Eighth Avenue, East Moline, Illinois 61244...
  • Page 4 ELECTRO FREEZE Shake Model CS705 SAFETY FIRST! Follow these four steps to safety ..1. Recognize Safety Information ..Look for this safety alert symbol throughout this manual. When you see this symbol on your freezer or in this manual, be alert to the potential for personal injury.
  • Page 5 NOT operate the freezer unless all service panels and access doors are secured with screws. DO NOT attempt to maintain or repair the freezer until the main power supply has been disconnected. Contact your local Electro Freeze Distributor for authorized service. 184592...
  • Page 6 — for factory service assistance —contact environment. H. C. Duke & Son, LLC. Electro Freeze Service Department by phone or FAX: The labels have been designed to with- stand washing and cleaning. All labels ...
  • Page 7 ELECTRO FREEZE Shake Model CS705 Safety Decal Locations P/N HC165126 WARNING Hazardous moving parts. Machine starts automatically. Do not operate with panel removed. P/N HC165025 Hazardous rotating beater shaft. Do not operate unit with dispense head removed. Before removing dispense head: 1.

  • Page 8: Table Of Contents

    ELECTRO FREEZE Shake Model CS705 Table of Contents SECTION DESCRIPTION PAGE SAFETY ..................ii SAFETY DECALS LOCATIONS ....... PART I INTRODUCTION ................1 NOTE TO INSTALLER ..............1 2.1. Uncrating and Inspection .............. 2 2.2. Installation ..................2 Electrical Connections ..............3 SPECIFICATIONS ................
  • Page 9 ELECTRO FREEZE Shake Model CS705 Table of Contents - continued SECTION DESCRIPTION PAGE START-UP INSTRUCTIONS ............ 23 Sanitizing ..................23 Priming ..................24 Dispensing Milk Shakes ............... 25 DAILY PROCEDURES ............... 26 9.1 Night or Idle Operation ..............26 9.1.1 General Cleaning ..............26 9.1.2 Operation ................
  • Page 10 This page is intentionally blank...

  • Page 11: Introduction

    Note to Installer This freezer must be installed and serviced by an Electro Freeze Distributor or authorized service technician in accordance with the installation instructions. After installation, the warranty registration card must be completed and returned to validate the warranty.

  • Page 12: Uncrating And Inspection

    ELECTRO FREEZE Shake Model CS705 2.1 Uncrating and Inspection CAUTION 1. Remove the carton from the pallet, Be sure to properly support and move the machine as close as the machine when removing possible to the permanent location. bolts and installing legs or 2.

  • Page 13: Electrical Connections

    ELECTRO FREEZE Shake Model CS705 Electrical Connections 3. Supply voltage must be within CAUTION ±10% of voltage indicated on the name- All materials and plate. Request your local power company connections must conform to to correct any voltage problem. local requirements and be in compliance with the National 4.

  • Page 14: Data Plate

    Figure 3-1 Reference Information Fill in the following information as soon as you receive the Electro Freeze CS705. (The item numbers — encircled, below — correspond with the callout numbers in figure 4-1.) 1 Model Number: _________________...

  • Page 15: Dimensions

    ELECTRO FREEZE Shake Model CS705 Dimensions Figure 3-2 Electro Freeze Model CS705 Dimensions 184592...

  • Page 16: Part Names And Functions

    ELECTRO FREEZE Shake Model CS705 Part Names and Functions Figure 4-1 Head Assembly 184592...
  • Page 17 ELECTRO FREEZE Shake Model CS705 Part Names and Functions — continued The following part names and descriptions refer to figure 4-1. 12 O-RING - PIVOT POST COVER - ASSY FLEX SHAFT Holds the pivot post in place. Lightly lu- Protects from accidental contact with bricate.
  • Page 18 ELECTRO FREEZE Shake Model CS705 Part Names and Functions — continued BLADE-SCRAPER SEAL(CUP)-BEATER SHAFT WASHER-DOUBLE SHAFT SEAL SEAL(CUP-BEATER SHAFT SHAFT-BEATER SEAL-BEATER SHAFT (CUP) BLADE-SCRAPER Figure 4-2 Beater Shaft Assembly The following part names and descriptions refer to figure 4-2. SHAFT-BEATER...
  • Page 19 ELECTRO FREEZE Shake Model CS705 4. Part Names and Functions — continued O-RING TUBE-MIX FEED INSERT-ASSY. MIX FEED O-RING Figure 4-3 Mix Feed Tube The following part names and descriptions refer to figure 4-3. TUBE-MIX FEED O-RING-MIX FEED ASSEMBLY Meters the correct amount of mix...

  • Page 20: Operator Controls & Indicators

    ELECTRO FREEZE Shake Model CS705 Operator Controls Figure 5-1 The following paragraphs describe the operator controls and indicators. Refer CAUTION to figure 5-1 for location of these Test operation of the head switch controls and indicators on the freezer. prior to placing the freezer in service.

  • Page 21: Rinse Switch

    ELECTRO FREEZE Shake Model CS705 Operator Controls — continued Prime / Calibrate This push button switch is used for priming and calibrating the flavor syrups. With the syrup switch in the “ON” position, the selector switch (5) in “AUTO” and a flavor...

  • Page 22: Flavor Selection Buttons

    ELECTRO FREEZE Shake Model CS705 Operator Controls — continued Rinse Switch This momentary switch activates the rinse water solenoid valve and the spinner motor to rinse the mixing chamber between flavor changes to eliminate flavor carryover. Flavor Selection Buttons These push buttons are used to select the flavor of shake to be dispensed.

  • Page 23: Disassembly And Cleaning

    ELECTRO FREEZE Shake Model CS705 Disassembly and Cleaning The cleaning and sanitizing instructions CAUTION explained in this manual are required to To avoid electrical shock or maintain a clean, sanitary freezer. The contact with moving parts, freezer should be disassembled,...

  • Page 24: Disassembly Instructions

    ELECTRO FREEZE Shake Model CS705 6.2 Disassembly Instructions Figure 6-2 Dispense Head Assembly 184592...
  • Page 25 ELECTRO FREEZE Shake Model CS705 6.2 Disassembly Instructions — continued 5. Remove the actuator rod (16) by CAUTION lifting up and swing out. To avoid electrical shock or contact with moving 6. Hold onto the bottom of the dis- parts, make sure all pense head (5) and release the mixer shaft switches are in the “OFF”...
  • Page 26 ELECTRO FREEZE Shake Model CS705 6.2 Disassembly Instructions — continued BLADE-SCRAPER SEAL(CUP)-BEATER SHAFT WASHER-DOUBLE SHAFT SEAL SEAL (CUP)-BEATER SHAFT SHAFT-BEATER SEAL-BEATER SHAFT (CUP) BLADE-SCRAPER Figure 6-3 Beater Shaft Assembly 11. Remove the beater bearing bushing (figure 6-2, 3) and beater shaft (figure 6-3) from the cylinder.

  • Page 27: Cleaning Instructions

    ELECTRO FREEZE Shake Model CS705 6.3 Cleaning Instructions CAUTION To prevent bacteria growth, 2. Wash all parts removed from the remove all O-rings when freezer thoroughly with a dish detergent cleaning. Failure to do so solution. Clean the following parts with the...
  • Page 28 ELECTRO FREEZE Shake Model CS705 Cleaning Instructions — continued c. The shaft cup seal, washer, and plunger O-ring grooves (figure 6-7). d. The beater shaft and the scraper blade pin holes, shown in figure 6-8. e. The mixer shaft and bushing.

  • Page 29: Assembly

    ELECTRO FREEZE Shake Model CS705 Assembly Correct assembly of the freezer is essential to prevent leakage of the product and damage to the freezer. To assemble the freezer, you will need an approved lubricant (such as Compound 7). Make sure all parts of the assemblies have been washed and sanitized before assembling.
  • Page 30 ELECTRO FREEZE Shake Model CS705 Assembly — continued Figure 7-4 Head Assembly 184592...
  • Page 31 ELECTRO FREEZE Shake Model CS705 Assembly — continued 6. See figure 7-4 and o-ring chart in 13. Install the dispensing head onto the replacement parts section of this the freezer by tilting the top of the head manual. Install the head o-ring (2) into the...
  • Page 32 ELECTRO FREEZE Shake Model CS705 Assembly — continued (10). O-Ring Tube-Mix Feed 21. See Figure 7-6. Install the o-ring Insert-Assy. (3) on the mix feed insert (2) and lubricate. Mix Feed Then install the o-rings (4) on the mix feed tube (1) lightly lubricate.Place the insert...

  • Page 33: Start-Up Instructions

    ELECTRO FREEZE Shake Model CS705 Start-up Instructions Sanitizing The sanitizing instructions explained in this Important: section are procedures to remove bacteria Do not insert any tools or objects into and maintain a clean, sanitary freezer. The the mix feed port or head dispensing shake freezer must be disassembled, hole while the freezer is running.

  • Page 34: Priming

    ELECTRO FREEZE Shake Model CS705 Priming Priming the freezer removes all excess air before placing in “AUTO” will damage and sanitizer from the freezing cylinder and the freezer. sets the proper overrun for the first cylinder 5. Fill the hopper with mix and Install of product.

  • Page 35: Dispensing Milk Shakes

    ELECTRO FREEZE Shake Model CS705 8.2 Dispensing Milk Shakes CAUTION DO NOT touch or get too close to moving parts. Clothing, jewelry, hair or other body parts may become caught in the machine and result in personal injury. 6. Product is ready to serve.

  • Page 36: Daily Procedures

    ELECTRO FREEZE Shake Model CS705 Daily Procedures Night or Idle Operation 9.1.1 General Cleaning 1. Remove the spinner flex shaft cover assembly (1) in preparation to disassemble the shake mix chamber (9). SAFETY NOTE: Removal of the flex shaft cover disables the spinner motor.

  • Page 37: Operation

    ELECTRO FREEZE Shake Model CS705 9.1.2 Operation 1. In areas where state and local 4. Check mix level in hopper to ensure health codes allow, product may remain in that there is enough mix to keep the indica- the freezer overnight, leave the Selector tor light off, add mix if necessary.

  • Page 38: Draining Product From Freezer

    ELECTRO FREEZE Shake Model CS705 Draining Product from Freezer NOTE: It is your responsibility to be aware 11. Follow with 2 gallons of warm of and conform to the requirements for water and repeat until the freezer dis- meeting local, state, and federal laws penses clear water.

  • Page 39: Product Information

    Measure and 6.0 oz. divided by 12 oz. record the weight. .5 x 100 = 50% overrun * Your Electro Freeze Distributor can provide a scale (P/N HC158049) that is graduated in overrun percentage. 10.2 Rerun...

  • Page 40: Syrup Flavor System

    ELECTRO FREEZE Shake Model CS705 Syrup Flavor System The syrup flavor system is included with all allows you to serve a vanilla shake and CS705 shake freeezers. This system four other flavors by the press of a button. 11.1 Syrup Line Disassembly and Sanitizing...
  • Page 41 ELECTRO FREEZE Shake Model CS705 11.1 Syrup Line Disassembly and Sanitizing - continued 7. Disconnect each outlet hose from 8. Take a clean sanitized cloth and pump. Remove each pump head from the wash all soiled surfaces inside cabinet. body by twisting 15° counterclockwise and Disconnect the syrup and water lines from pull straight out.

  • Page 42: Syrup Line Assembly And Sanitizing

    ELECTRO FREEZE Shake Model CS705 11.2 Syrup Line Assembly And Sanitizing 2. Open the cabinet below the freezer Important: to install the pump housings. The pump The chocolate syrup is a different housing with the clear peristaltic tube is to viscosity and requires different hoses.
  • Page 43 ELECTRO FREEZE Shake Model CS705 11.2 Syrup Line Assembly and Sanitizing - continued c. Place the bucket of sanitizing 5. Sanitize the syrup line system. solution on the floor by the cabinet. Place Prepare 2 gallons (7.6 liters) of the syrup bottle caps with the holes in the sanitizing solution in a container.

  • Page 44: Syrup Calibration

    ELECTRO FREEZE Shake Model CS705 11.3 Syrup Calibration 12. When desired syrup dispense rate is 1. Sanitize and prime each syrup line as described in section 11.2. achieved, remove the coupling insert and reconnect the mix chamber syrup tube. 2. Select a syrup flavor by pushing the proper button on the front of the freezer.

  • Page 45: Routine Maintenance

    ELECTRO FREEZE Shake Model CS705 Routine Maintenance Electro Freeze recommends the following sched- WEEKLY ule to help maintain your equipment in like-new operating condition. Take the time to learn and perform these routine procedures and receive in 1. Carefully inspect all parts for...
  • Page 46 DO NOT place the DO NOT place the freezer in service until the freezer in service until the problem has been problem has been fixed. fixed. C. Air Condenser. Call your Electro Freeze Distributor for service to clean air condenser fins. 184592...
  • Page 47 Should you have any questions on items which are not included in this schedule or problems where service assistance is needed, please call your local Distributor or H. C. Duke & Son, LLC, Electro Freeze, Service Department for factory service assistance. Phone number:...
  • Page 48 ELECTRO FREEZE Shake Model CS705 Routine Maintenance -— continued Winter Storage To protect the unit during seasonal shutdown, it is important to store the CS700 Shake Freezer properly. Please use the following procedures: Disconnect all power to the freezer. Disassemble and wash all parts that come into contact with the mix with a warm, mild detergent solution.

  • Page 49: Troubleshooting Tables

    PERSONAL INJURY. DO NOT ATTEMPT TO CONTINUE UNTIL THE SAFETY PRECAUTIONS ARE THOROUGHLY UNDERSTOOD. CAUTION All maintenance adjustments must be done by an Electro Freeze Distributor or authorized service technician. CAUTION To avoid electrical shock or contact with moving parts, make sure all switches are in the “OFF”...
  • Page 50 Unblock condenser or have cleaned by product too soft. air flow. your Electro Freeze Distributor. (Product temperature Torque control not set firm enough. Contact your Electro Freeze Distributor for above 28°F service. [-2.2°C] ) C omponent failure. Contact your Electro Freeze Distributor for service.
  • Page 51 Product too cold. See “Dispensed product too hard.” dispensing head. Dispensed Torque control erratic or set too firm Contact your Electro Freeze distributor for product too service. hard. Low suction pressure, refrigeration Contact your Electro Freeze distributor for system.
  • Page 52 Open start capacitor. (Single phase only) Contact your Electro Freeze Distributor for service. Defective compressor Contact your Electro Freeze Distributor for service. NOTE: Contact your authorized Electro Freeze distributor for instructions prior to warranty compressor replacement. QUALITY PARTS PROTECT YOUR EQUIPMENT Keep your freezer in excellent condition.
  • Page 53 REPLACEMENT PARTS MANUAL with ILLUSTRATIONS COMPACT SERIES UALITY ARTS PROTECT SHAKE FREEZER YOUR Model CS705 EQUIPMENT 184592-01 9/12 REEZER XCELLENT ONDITION LWAYS ONTACT LECTRO REEZE ISTRIBUTOR EPLACEMENT ARTS H.C. Duke & Son, LLC P/N 184592-01 September 2012 Printed in U.S.A.
  • Page 54 ELECTRO FREEZE Model CS705 Replacement Parts Orders You must have the serial number of your Name: _______________________ freezer when ordering parts — parts may Adress:_______________________ differ with a particular serial number of the same model. ______________________________ Parts are listed using terminology that best Phone:________________________ fits the function of the part.
  • Page 55 ELECTRO FREEZE Model CS705 Figure 1 Head Assembly Item Part No. Description Item Part No. Description 11 ..HC121019 ..Handle-Assy. Disp. Complete * ..HC121006 ..Head-Assy. Complete 5 Flavor HC162629 ..Knob-Ball 3/8 1 ..HC121020 ..Cover-Assy Flex Shaft 12 ..

  • Page 56: Figure 2 Beater Shaft Assembly

    ELECTRO FREEZE Model CS705 SEAL-BEATER SHAFT (CUP) Figure 2 Beater Shaft Assembly Item Part No. Description 1 ....HC118708 ....Beater-Assy. Shake Short 2 ....HC137362 ....Blade-Scraper Shake Non Rev 3* ....HC137593 ....Washer-Double Shaft Seal 4* ....HC160557 ....Seal-Beater Shaft * Can be ordered together HC115525 ....

  • Page 57: Figure 3 Mix Feed Tube Assembly

    ELECTRO FREEZE Model CS705 Figure 3 Mix Feed Tube Assembly Item Part No. Description * ..HC121025 ..Tube-Assy. Mix Feed .218 1 ..HC141175 ..Tube-Mix Feed .218 Orifice 2 ..HC120664 ..Insert-Assy. Mix Feed (Regulator) 3 ..HC160611 ..O-ring (Insert-Regulator) 4 ..

  • Page 58: Figure 4 Plunger Box

    ELECTRO FREEZE Model CS705 Figure 4 Plunger Box Item Part No. Description 1 ..HC150985 ..Fuse-Fast AGC 1.0A 1/4 x 1-1/4 2 ..HC150984 ..Breaker-Circuit 0.7A 3 ..HC121011 ..Switch-Assy. Plunger (See Figure 5) HC162303 ..Spring-Plunger Rod HC150456 ..

  • Page 59: Figure 5 Switch Assembly

    ELECTRO FREEZE Model CS705 Figure 5 Switch Assembly Item Part No. Description * ..HC121011 ..Switch-Assy. Plunger Shake Pres 1 ..HC162303 ..Spring-Plunger Rod 2 ..HC159973 ..Screw-RDHM #6-32 x 2 Zn 3 ..HC141209 ..Guard-Switch Assembly 4 ..

  • Page 60: Figure 6 Electrical Box

    ELECTRO FREEZE Model CS705 Figure 6 Electrical Box Item Part No. Description 1 ....HC151414 ... Capacitor-Start 2 ....HC150244 ... Capacitor-Run 3 ....HC151474 ... Relay-Compressor Start 4 ....IC574100325 ..Transformer-75VA / 24VAC / MURD 5 ....HC119989 ... Kit-Thermostat & Retainer 6 ....
  • Page 61 ELECTRO FREEZE Model CS705 Figure 7 Syrup System View (Sheet 1 of 2) VIEW FROM BACK SIDE OF HC121066 BACKET-ASSY FLAVOR PUMPS Use only original or authorized replacement parts with this freezer. Use of unapproved parts will void warranty. 184952-01...

  • Page 62: Figure 7 Syrup System

    ELECTRO FREEZE Model CS705 Figure 7 Syrup System View (Sheet 1 of 2) Item Part No. Description 1 ..HC121100 ..Kit-Tube Assy. Syrup Yellow and Coupling 2 ..HC121101 ..Kit-Tube Assy. Syrup Brown and Coupling 3 ..HC121102 ..Kit-Tube Assy. Syrup Red and Coupling 4 ..

  • Page 63: Figure 8 Panel View

    ELECTRO FREEZE Model CS705 Figure 8 Panel View (Sheet 1 of 2) Use only original or authorized replacement parts with this freezer. Use of unapproved parts will void warranty. 184952-01...
  • Page 64 ELECTRO FREEZE Model CS705 Figure 8 Panel View (Sheet 1 of 2) Item Part No. Description 1 ..HC141185 ..Panel-Rear 2 ..HC140658 ..Panel-Side RH 3 ..HC150541 ..Light-Indicator 28v ADD MIX 4 ..HC196261 ..Cover-Drip Tray 5 ..HC196260 ..Tray-Drip 5A ..
  • Page 65 ELECTRO FREEZE Model CS705 Figure 9 Side View (Sheet 1 of 2) Use only original or authorized replacement parts with this freezer. Use of unapproved parts will void warranty. 184952-01...
  • Page 66 ELECTRO FREEZE Model CS705 Figure 9 Side View (Sheet 1 of 2) Use only original or authorized replacement parts with this freezer. Use of unapproved parts will void warranty. 184952-01...

  • Page 67: Figure 10

    ELECTRO FREEZE Model CS705 Figure 10 Drive Shaft and Bearing Assembly Item Part No. Description * .... HC120946 ..Bearing-Assy. Rear 1 .... HC130189 ..Spacer-Rear Bearing 2 .... HC153024 ..Bearing-Ball 1.00 ID x 2.0472 OD 3 .... HC153025 ..Stamping-Retainer Plate 4 ....

  • Page 68: Accessories

    ELECTRO FREEZE Model CS705 Accessories Part No. Description HC162548 ....Adhesive-Filter Spray HC196109 ....Beaker-150ML HC196103 ....Bottle-Wash 500ML HC158003 ....Brush-7/16 x 1-1/8 Double Handle HC158010 ....Brush-6 inch w/o Handle (Use with Handle HC158012) HC158026 ....Brush-1 inch Diameter 12 inches Long HC158028 ....
  • Page 69 ELECTRO FREEZE Model CS705 ELECTRO FREEZE Shake Model CS705 Use only original or authorized replacement parts with this freezer. Use of unapproved parts will void warranty. 184952-01...
  • Page 70 Cleaning & Sanitizing Electro Freeze Model CS705 ® This instruction sheet is not intended to be used in place of the Operator’s Manual. Use the following information to assist you only after you have read, understood, and are accomplished in the procedures for cleaning and sanitizing detailed in the Electro Freeze Operator’s Manual.
  • Page 71 Problem? Contact your local authorized distributor or OPEN at all times. If not open, the flow of mix will be the freezer manufacturer, Electro Freeze Service Depart- restricted. If lubricant blocks the inlet hole in the ment, 2116 Eighth Avenue, East Moline, IL 61244, (309) tube it would also restrict the flow of mix.
  • Page 72 This instruction sheet is not intended to be used in place of the Operator’s Manual. Use the following information to assist you only after you have read, understood, and are accomplished in the procedures for cleaning and sanitizing detailed in the Electro Freeze Operator’s Manual. SYRUP LINE CLEANING & SANITIZING hot water to flow through the tube and mix chamber.
  • Page 73 If further adjustment is needed repeat steps 4 through 9. Problem? Contact your local authorized distributor or the freezer manufacturer, Electro Freeze Service Department, 2116 Eighth Avenue, East Moline, IL 61244, (309) 755-4553, (800) 755-4545 or FAX (309) 755-9858.

  • Page 74: Alphabetized Parts List

    ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Adhesive-Filter Spray ........HC162548 ..* ..J2O-2935 - Bar-Alignment HC113948 ...
  • Page 75 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Bushing-Beater Bearing ........HC196072 ... 1 ..J2O-2935 - Bushing-Mixer Shaft ..........
  • Page 76 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Coupling-Assy. Insert 1/4 Flow 1/8 NPT HC121061 ... 1 ..J2O-2935 - (Used in Calibration Process) ......
  • Page 77 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Glass-Sight ............HC155059 ... 1 ..J2O-2935 - Grommet-1.1 OD 7/8 GD x 5/8 ID (Drain Tube . HC159064 ... 1 ..J2O-2935 - Grommet-Comp.Mtg.
  • Page 78 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Keeper-Assy. Spindle ........HC113435 ... 1 ..J2O-2935 - Key-Drive 1/4"...
  • Page 79 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) O-ring (Mix Feed Tube) ........HC160621 ... 2 ..J2O-2935 - O-ring (Pivot Post) ..........
  • Page 80 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Scale-Overrun ..........HC158049 ..1 ..J2O-2935 - Screw-RDHM #6-32 x 2 Zn ....... HC159973 ... 1 ..J2O-2935 - Screw-SK Set 1/4-20 x 1/4 ........
  • Page 81 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Stop-Terminal Block End (Cover) ...... HC150594 ... 1 ..J2O-2935 - Stud-Assy.
  • Page 82 ELECTRO FREEZE Shake Model CS705 Alphabetized Parts List for Model CS705 IMPORTANT: All parts shown are for standard models designed for 208-230v/60Hz/1phase. PART PART SERIAL NUMBER DESCRIPTION NUMBER (FROM – TO) Tube-Assy. Mix Feed .218 ......... HC121025 ... 1 ..J2O-2935 - Insert-Assy.

This manual is also suitable for:

Cs705

Table of Contents