ELECTRO FREEZE COMPACT Series Operator's Manual page 51

Replacement Parts Orders
You must have the serial number of your
freezer when ordering parts - parts may
differ with a particular serial number of
the same model.
Parts are listed using terminology that
best fits the function of the part. The
illustrations in this section will help you
to find the correct part number and
description. The alphabetized parts
list can be used to verify part numbers
pertaining to the serial number of your
unit.
All parts in this section are for a
standard model 208-230/60/1phase.
For models with another configuration
order by freezer serial number.
Place your parts order through your local
authorized Electro Freeze distributor.
Table of Contents
ILLUSTRATIONS
Figure 1 Head Assembly ..............................................1
Figure 2 Beater Shaft Assembly ...................................2
Figure 3 Mix Feed Tube Assembly ................................3
Figure 4 Switch Box .....................................................4
Figure 5 Capacitor/Relay Box .......................................5
Figure 6 Model CS705-M2 Assembly.............................6
Figure 7 Idler Pulley Assembly .....................................8
Figure 8 Panel View .....................................................9
OTHER LISTS and INFORMATION
Accessories ................................................................ 10
O-Ring Chart ............................................................... 11
Alphabetized Parts List ................................................ 13
184592-01
ELECTRO FREEZE Shake Model CS705-M2
Important:
PART II
Name: ________________________
Address: ______________________
______________________
Phone: ________________________
If you require any further assistance contact:
H.C. Duke & Son, LLC., Electro Freeze as
follows:
Phone: (309) 755-4553
(800) 755-4545
FAX: (309) 755-9858
E-mail: service@electrofreeze.com
iii