Mix Float - ELECTRO FREEZE COMPACT Series Operator's Manual

ELECTRO FREEZE Shake Model CS705-M2
5 Operator Controls
5.7 Rinse Switch (7)
This momentary switch activates the rinse
water solenoid valve and the spinner
motor to rinse the mixing chamber
between flavor changes to eliminate flavor
carryover.
5.8 Flavor Selection Buttons (8)
These push buttons are used to select the
flavor of shake to be dispensed. Press
the button for the desired flavor. Selection
of another button will cancel the previous
selection. 'Vanilla' provides product
from the cylinder only, with no added
flavoring. When 'Chocolate', Strawberry',
'Banana' , or 'Special' are selected, that
corresponding pump will operate when
product is dispensed.
5.9 Malt Switch (9)
When the malt switch is turned on the
malt pump will operate when the handle is
pulled.
5.10 Malt Light (10)
This light indicates when the Malt switch
is turned on.
5.11 Indicator Light - "ADD MIX" (11)
This light indicates the mix in the mix
hopper is at a low level and should be
refilled as soon as possible. Always
maintain at least 2 inches (5.1 cm) of mix
in the hopper. For best operating results
keep hopper full.
5.12 Mix Float (not shown)
When this float is mounted on the float
stem inside the hopper it automatically
senses the mix level. It activates the "Add
Mix" light.
12
— continued
184592-01