Operator Controls And Indicators; Selector Switch - ELECTRO FREEZE FREEDOM 360 Series Operator's Manual

ELECTRO FREEZE Soft Serve Model 99T-RMT
5

Operator Controls and Indicators

Figure 5-1
The following paragraphs describe the
operator controls and indicators. Refer to
figure 5-1 for location of these controls
and indicators on the freezer.
NOTE: The head must be in place before
the beater will operate.
5.1

Selector Switch 1

12
This three-position switch controls the
operating mode of your freezer.
a. "CLEAN" (left) — This position
operates the beater only (no refrigera-
tion to the cylinder). This position must
be used in all cleaning and sanitizing
operations.
b. "OFF" (center) — In this posi-
tion the beater motor and refrigeration
system will not operate.
CAUTION
Test operation of the head
switch prior to placing the
freezer in service. See Section
11, Routine Maintenance,
Monthly.
Important:
Do not use the "AUTO" position with
water or sanitizer in the cylinder —
the freezer will be damaged.
c. "AUTO" (right) — This position
activates both the beater motor and the
refrigeration unit. This is the normal
operating position.
184621