ELECTRO FREEZE Shake Model CS705
5
Operator Controls
5.1
Syrup Pump Switch
10
Figure 5-1
The following paragraphs describe the
operator controls and indicators. Refer
to figure 5-1 for location of these
controls and indicators on the freezer.
NOTE: The head, actuator rod, and
metal cover must be in place before
the beater will operate.
This two-position switch controls the
operating mode of your freezer.
a.
"ON" (right) — This position
operates the syrup motor. Always use this
mode when operating the syrup system.
b.
"OFF" (left) — In this position
the syrup motors do not run.
1
CAUTION
Test operation of the head switch
prior to placing the freezer in
service. See Section 12, Routine
Maintenance, Monthly.
—continued
184592