ELECTRO FREEZE COMPACT Series Operator's Manual page 18

ELECTRO FREEZE Shake Model CS705-M2
4 Part Names and Functions
Figure 4-2 Beater Shaft Assembly
The following part names and descriptions
refer to figure 4-2.
1.) SHAFT-BEATER:
Rotates in the freezing cylinder,
blending air and mix and ejecting
product.
2.) BLADE-SCRAPER:
Scrapes the frozen product from
the freezing cylinder wall.
3.) SEAL (CUP) - BEATER SHAFT:
Seals the opening between the
freezing cylinder and the beater.
DO NOT LUBRICATE.
4.) WASHER - SHAFT SEAL:
Holds the shaft seals together.
Must be lubricated.
8 184592-01