Operator Controls & Indicators; Day/Night Switch - ELECTRO FREEZE SOFT SERVE TWIST SL500 Operator's Manual

Table of Contents

5 Operator Controls and Indicators

Figure 5-1

The following paragraphs describe the

operator controls and indicators. Refer

to figure 5-1 for location of these

controls and indicators on the freezer.

NOTE: The dispense head must be in

place before the freezer will operate.

5.1

Day– Night Switch

184599

This two-position switch controls the

day and night refrigeration modes.

a. "DAY" (left) — The low tem-

perature thermostat controls the

system refrigeration to maintain the

product serving temperature between

18° to 21ºF (-8° to -6°C). This is the

normal operating position.

ELECTRO FREEZE Soft Serve Model SL500

b. "NIGHT" (right) — This energy-

saving mode will reduce product agita-

tion. The freezer will automatically cycle

to maintain temperatures below 40

C). Use this position when the freezer

will not be in use for periods of more

than an hour.

CAUTION

Test operation of the head

switch prior to placing the

freezer in service. See

Section 11, Routine

Maintenance, Monthly.

Table of Contents

Show Quick Links

Table of Contents