ELECTRO FREEZE COMPACT Series Operator's Manual page 37

9.1.2 Operation
1. In areas where state and local health
codes allow, product may remain
in the freezer overnight, leave the
Selector Switch in the "AUTO"
position and the syrup switch to the
"OFF" position.
Note: The plunger rod and cover must
be in place for the unit to operate.
2. Clean all soiled surfaces with a warm
dish detergent solution.
3. Turn the mix feed regulator to the
"CLOSED" position as shown in figure
9-2.
184592-01
ELECTRO FREEZE Shake Model CS705-M2
Pin is in line with hole.
DAY
Look through top hole
in tube — you should
see clear through.
Figure 9-2 Mix Feed Tube Positions
4. Check mix level in hopper to ensure
that there is enough mix to keep
the indicator light off, add mix if
necessary. Do not dispense
product when the mix feed
regulator is in the "CLOSED"
position.
5. Before serving from the machine use
the wash bottle and spray the plunger
and mix chamber opening with
sanitizing solution and "OPEN" the
mix feed regulator and fill the hopper
with mix (figure 9-2).
Pin is not in line with hole.
CLOSED
NIGHT
Look through top hole
in tube — you should
see the inner white
plastic tube (regulator)
blocking the opening.
27