Test Voltages - Siemens SITOP PSU8600 Manual

Safety, approvals, EMC

10.2 Test voltages

10.2 Test voltages
Figure 10-1
Only the manufacturer can perform the type test and production test; users can also perform
the field test.
Preconditions for performing the field test:
Tests (A) & (B)
● Connect the input terminals with one another
● Connect the output terminals with PE
Test (C)
● Connect the output terminals with one another and measure with respect to PE
Table 10- 1 Test voltage
Type test
Production test
Field test
Remark:
Tripping current for DC measurement: 0 mA
Tripping current for AC measurement: < 100 mA
406
Test voltage without auxiliary contact diagram
Test time Prim ↔ sec (A)
60 s 4200 V DC
60 s 3000 V AC
1 s 2200 V DC
1 s 1500 V AC
1 s 2200 V DC
1 s 1500 V AC
Prim ↔ PE (B) Sec ↔ PE (C)
2200 V DC 707 V DC
1500 V AC 500 V AC
2200 V DC 860 V DC
1500 V AC 600 V AC
2200 V DC 500 V DC
1500 V AC 350 V AC
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76