Siemens SITOP PSU8600 Manual page 167
Power supply system
Hide thumbs
Also See for SITOP PSU8600:
- Manual (314 pages) ,
- Function manual (94 pages) ,
- Manual (99 pages)
Table of Contents
Advertisement
Connecting third-party battery modules
Third-party battery modules can be connected to a UPS module. These battery modules do
not represent a data interface to SITOP UPS8600. Only battery modules using "Pb
technology" or "pPb technology" can be connected.
Third-party battery modules can only parameterized in the REMOTE operating mode.
Parameterization for the MANUAL operating mode is removed from the saved configuration.
The parameters are applicable for all battery modules in a chain.
Note
Connecting third-party battery modules
When connecting third-party battery modules, data connection via the COM connections is
not possible.
Note
If third-party battery modules are to be used, then all of the modules connected to a UPS
module must be of the same type. The connected modules must have the same
technological parameters and the same service life.
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
6.8 Connecting battery modules to the UPS module
Installation
167
Advertisement
Table of Contents
