Siemens SITOP PSU8600 Manual page 205

Procedure
1. In the graphic editor, select the hardware configuration of the basic unit to display the
PSU8600 station window.
2. Navigate in the hardware catalog to the expansion modules under
"PROFINET IO\I/O\PSU8600\PSU8600\[inserted PSU8600]\CNX8600".
3. Select the required expansion module in the Hardware Catalog.
4. Drag the expansion module and drop it into the required slot in the station window.
Alternatively, the expansion module can also be added by double-clicking on the entry in
the Hardware catalog.
The expansion module is inserted into the selected slot.
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
Engineering and remote access
7.5 SIMATIC STEP 7
205