Siemens SITOP PSU8600 Manual page 341

Display name
Alarm_N_SafetyBufferingExtension
Running
Alarm_N_SerialnumberDiverge
Alarm_N_SoftwareDownload
Alarm_N_SoftwareVersionDiverge
Alarm_N_SOHTestRunning
Lock
Display name
Lock
MethodSet
Display name
UpdateFirmware
StartCapacityTracingTest
StopCapacityTracingTest
ParameterSet
All variables of the SITOP UPS8600 UPS module are listed together under the
"ParameterSet" node.
Parameters not described otherwise, in alphabetical order:
Display name
ModuleBatteryTestIntervalSetpoint
ModuleBufferTimerSetpoint
ModuleBufferTimerEnableSetpoint
ModuleMaximumChargingpo-
werSetpoint
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
Data type
Boolean
Boolean
Boolean
Boolean
Boolean
Data type
Object
Data type
Method
Method
Method
/
Data type
Enumeration
Integer
Boolean
Enumeration
Definition Description
PropertyType The multiple buffer event over-
stress protection was activated,
because three buffer events oc-
curred within a minute.
PropertyType Different serial number detected
PropertyType The firmware download to the
system has been completed suc-
cessfully. A system reset is re-
quired to run the firmware update.
PropertyType Different firmware version detected
PropertyType Battery 'State of Health' tests (SoH)
are performed.
Definition Description
LockingServiceType See Section "Lock (Page 323)".
Definition Description
- Firmware update
- Battery 'State of Health' tests (SoH)
are started.
- Battery 'State of Health' tests (SoH)
are stopped.
Definition Description
MultiStateDiscrete- Interval in which the automatic
Type battery test is executed (0 = never,
1, ..., 24 = every 1, ...,24 hours)
AnalogItemType Set time until the buffer timer ex-
pires in ms
PropertyType The buffer time is activated
MultiStateDiscrete- Maximum permissible charging
Type power (0 W = off, 60 W = low,
120 W = high)
Engineering and remote access
7.8 OPC UA server
341