Siemens SITOP PSU8600 Manual page 164

Installation
6.8 Connecting battery modules to the UPS module
Connecting a BAT8600 battery module
1. Connect the UPS module with the battery module at power terminal
communication terminal
Figure 6-1
2. Install the reserve fuse
3. Insert the fuse
The connected battery module is automatically detected.
Note
Please note that identifying a BAT8600 battery module at a UPS module after inserting the
connecting cables or after inserting the fuse in the BAT8600 battery module can typically
take 5 seconds.
164
②
.
Recommended wiring from a battery module
⑦
.
③
①
and at the
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76