Chrysler Concorde 2004 Service Manual page 953

Hide thumbs Also See for Concorde 2004:

Table of Contents

*CHECKING THE A/C RELAY OUTPUT —

Turn the ignition off.

Disconnect the A/C Clutch Relay from the PDC.

Disconnect the A/C Clutch harness connector.

Measure the resistance of the (C3) A/C Clutch Relay Output circuit between the PDC

and the A/C Clutch harness connector.

Is the resistance below 5.0 ohms?

Yes → Replace the A/C Clutch Relay.

→ Repair the (C3) A/C Clutch Relay Output circuit for an open.

Perform POWERTRAIN VERIFICATION TEST VER - 2 - NGC.

DRIVEABILITY - NGC

APPLICABILITY

Chapters

Table of Contents

300m 2004 Intrepid 2004