Symptom:
*ODOMETER NOT OPERATING PROPERLY
ATTEMPT TO COMMUNICATE WITH THE INSTRUMENT CLUSTER
ATTEMPT TO COMMUNICATE WITH THE TCM
OBSERVE THE INSTRUMENT CLUSTER
TEST
1
Turn the ignition on.
With the DRB, select Body then Electro/Mech Cluster (MIC).
Was the DRB able to I/D or communicate with the Instrument Cluster?
Yes → Go To 2
→ Refer to the Communication category for the related symptom(s).
No
2
Turn the ignition on.
With the DRB, select Transmission.
Was the DRB able to I/D or communicate with the TCM?
Yes → Go To 3
→ Refer to the Communication category for the related symptom(s).
No
3
Turn the ignition off.
While observing the odometer turn the ignition to the run position.
Did all odometer segments illuminated?
Yes → Test Complete.
→ Replace the Instrument Cluster.
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
375
APPLICABILITY
All
All
All